A short overview of all important features:
Video analysis and control of the LEDs is done by only one device.
Supports PAL, NTSC, SECAM. Input via S-Video (Y/C) or Composite (CVBS).
Automatically wakes up or goes into standby depending on video signal.
analysing each video frame (50/60 Hz) processing ~22 MByte/sec.
Included receiver for infrared remote control.
USB full speed device (for initial configuration or firmware update via PC)
You can connect SCIMO 1.2 HDMI to every device with S-Video or Composite or with a hdmi to s-video converter to a HDMI device.
LED 1: Status (On/Off)
LED 2: Video signal available
S-Video oder Composite Input
USB 2.0 device (for initial configuration via PC)
Power connector (5V / max. 11A)
LED stripe connector (WS2811, WS2812, WS2812B)
Done by very powerfull 32-bit ARM Cortex-M4 microcontroller with DSP (Digital Signal Processor) and FPU (Floating Point Unit).
Supply voltage: 5VDC +/- 5%
Input power (Powered up): 0.19A / 0.95W
Input power (Standby): 0.06A / 0.3W
Operating Temperture: 0°C bis 40°C
Storage Temperture: -40°C bis 70°C
Humidity: 10 % to 90 % (non-condensing)
Typ: WS2811, WS2812, WS2812B
Max. current: max. 11A @ 5VDC
Automatically wakes up or goes into standby
TVP5150AM1 from Texas Instruments
Internal video format: ITU-R BT.656
If you have any Questions or if you would like to get an individual quotation, please use the contact form.